Stainless Steel Bar 410S

Stainless steel 410S is produced in accordance with the American ASTM standard of stainless steel, equivalent to China's 1Cr13 stainless steel, S41000 (AISI, ASTM).
0.15% carbon, 13% chromium,410S stainless steel: good corrosion resistance, machinability, general purpose blade, valve type.
Heat treatment of stainless steel: solution treatment (℃) 800-900 slow cooling or 750 fast cooling
410S Stainless steel bars Price in China ,Manufacturer of 410S Stainless Steel bars
1) High strength;
2) Excellent machinability
3) Hardened after heat treatment;
4) Magnetic;
5) not suitable for harsh corrosive environment.
Scope of application
General blade, mechanical parts, class 1 tableware (spoon, fork, knife, etc.).

400 series stainless steel is an alloy of iron and carbon-chromium. This stainless steel has a martensitic structure and iron, so it has normal magnetic properties. 400 series stainless steel has strong resistance to high temperature oxidation, and compared with carbon steel, its physical and mechanical properties are further improved. Most 400 series stainless steels can be heat treated.

The commonly used 400 series stainless steel varieties include 430 type with 18% chromium and 410 and 420 types with 13% chromium, among which type 430 stainless steel is the most used. The 430 type stainless steel model is characterized by low price, low thermal expansion coefficient, and chloride stress corrosion resistance better than the 300 series stainless steel type; however, its disadvantage is that the formability, weldability and tensile strength are lower than that of the 304 type stainless steel model. , therefore, its field of use is limited. Under the same chromium content, in oxidizing media such as atmosphere, fresh water and nitric acid, the corrosion resistance of 400 series stainless steel is the same as that of 300 series stainless steel, and usually the corrosion resistance of 400 series stainless steel is better than that of 200 series stainless steel. . The addition of trace amounts of niobium, titanium, copper and aluminum to the 400 series stainless steel can improve its deep drawing performance, weldability, corrosion resistance and high temperature strength, and can partially replace the 304 type stainless steel model. At present, the 400 series stainless steel varieties after adding the above trace elements are SUS430LX, 430JIL, 444, 445M2, NSS447M1 and so on. In the United States and Japan, these models are widely used in automobile exhaust pipes (type 409 and 410L), washing machine drums (type 430), kitchen utensils, home appliances, medical equipment, water heaters, roof panels, curtain walls and power plant equipment.
This is the most cost effective grade of steel. So the 410S Stainless Steel bars Price is lower compared to other grades of stainless steels and all metallic products in general. There are different versions of the material with low carbon and high carbon content. The low carbon version, 410S barss are very good for welding applications as they have less carbide precipitation and less localized corrosion.

Equivalent Grades

Grade Euronorm China GB Japanese JIS
No.
410S 1.4000 1Cr13 SUS410S

Standard Specification

Section Round, Square, Hexagonal bar, oval, shaped
Diamater 0.254mm,1mm,10.0mm,25.4mm,50.8mm,76.2mm,101.6mm,127.0mm,152.4mm,300.0mm,600.0mm
Length Since the custom
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish Hot rolled Bar (HR), Cold rolled Bar (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form  Bars, Foils, Rolls, Plain Bar, Shim Bar, Perforated Bar, Chequered Bar, Strip, Flats,
 Blank (Circle), Ring (Flange) etc.

Composition content

Grade C Mn Si P S Cr Mo Ni Ti
410S Min.
Max.
≤0.15 ≤1.00 ≤1.00 ≤0.040 ≤0.03 11.5~13.5 / / /
Tensile strength :520MPa
Yield strength :275MPa
Elongation :55 to 60%
Elastic modulus :29,000,000 psi is equivalent to: 203000MPa
Hardness requirement (Brinell hardness)
183 n/was (MPa).
Density :.280 LBS /cubic inch(density 7.93g/cm3)

Characteristic machining technology


1D -- The surface has discontinuous granular shape, also known as fog surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D - A slightly silvery white colour.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B -- Silver white with better gloss and flatness than a 2D surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
Ba - Excellent surface gloss, high reflectivity, like a mirror surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
No.3 -- Good gloss, coarse grain surface.
Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002).
No.4 -- Good gloss, fine lines on the surface.
Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002).
HL -- Silver grey with hair streaks.
Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain.
MIRRO -- Specular.
Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.

Price List

Stainless Steel 410S bar Price List 410S bar FOB Shanghai Per Unit (USD)
410S stainless steel Round Bar $2000.00-$2200.00
410S mirror Stainless Steel Bar $2200.00-$2500.00
410S Stainless Steel Black Bar $2100.00-$2400.00
410S Stainless Steel Square Bar $2000.00-$2100.00

Get Information