Get A Quote

Stainless Steel Coil 316Ti

Stainless Steel Coil 316Ti

SUS316Ti stainless steel is austenitic stainless steel, SUS316Ti stainless steel is added to SUS316 steel to improve the intergranular corrosion resistance.
Sus316Ti stainless steel has strong intergranular corrosion resistance. It is widely used in petrochemical industry, mechanical and electrical hardware, shipbuilding and power plant.
316Ti Stainless steel coil Price in China ,Manufacturer of 316Ti Stainless Steel coil
316Ti stainless steel plate national standard 0Cr18Ni12Mo2Ti Chinese brand is 1Cr18Ni12Mo2Ti stainless steel plate, 316Ti stainless steel plate is added in SUS316 steel Ti to improve the intergranular corrosion resistance.
Used to resist sulfuric acid, phosphoric acid, acetic acid, acetic acid equipment.
 
These attributes refer to products in similar, but not identical, attributes that are specified for other products, such as plates and forgings in their respective specifications.
Lower minimum pre and post thermal temperatures reduce the incidence of welds, cracking and simplify welding.
Low hardness decreases in the heat affected zone to minimize deterioration in the mold performance.
 

Equivalent Material of 316Ti Stainless Steel Coil

Grade Euronorm China GB Japanese JIS
No.
316Ti 1.4571 1Cr18Ni12Mo2Ti SUS316Ti


Standard Specification Of 316Ti Plate

Thickness 0.3mm-12.0mm
Width 600mm, 700mm, 800mm, 900mm, 1000mm, 1200mm, 1220mm, 1500mm, etc
Length Per Coil
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Finish Cold rolled coil (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats,
Blank (Circle), Ring (Flange) etc.


316Ti stainless steel composition content.

Grade C Mn Si P S Cr Mo Ni Ti
316Ti Min.
Max.		 ≤0.08 ≤2.00 ≤1.00 ≤0.035 0.03 16.00~19.00 1.80~2.50 11.00~14.00 0.2~0.70
YS (MPa) ≥205
TS (MPa) ≥520
EL (%) ≥40
Hv around 200 °
Thickness: cold 2B board (0.09-6.0mm);
Hot rolled industrial plate No.1(3-50mm) medium thick plate, chemical plate, high temperature plate;
Width: 5mm-- 850mm steel belt;
1000, 1219, 1250, 1500, 1800, 2000mm coil, flat plate
Surface: 2B smooth surface, No.1 industrial surface, BA (6K) mirror, 8K mirror, 9K mirror, drawing surface, frosted surface.
Origin: domestic, imported (Sweden, Japan, Finland, South Korea, South Africa, Taiwan)
 

Get Information

WhatsApp